Last 5 years Anna University Questions for the subject of Engineering Materials and Metallurgy is given and also the syllabus of this subject also listed for yuore referrence,
Question Paper
Code : P 1430
B.E./B.Tech. DEGREE EXAMINATION,NOVEMBERJDECEMBER 2009.
Fourth Semester
Mechanical Engineering
MH 1151- ENGINEERING MATERIALSAND METALLURGY (Regulation 2004)
(Common
to Fourth-Semester-Automobile Engineering, Production Engineering
and
Second Semester-Mechtronics Engineering)
(Common
to B.E. (Part-Time) Third Semester Mechanical
Engineering
Regulation 2005)
Time : Three hours
Maximum: 100 marks
Draw sketches wherever necessary.
Answer
ALL questions. PART A-(10 x 2 = 20 marks)
1. Define solid solution.
2. How are steels
classified?
3. When will you prefer carbonitriding?
4. Define Hardness.
5. Name the alloying elements in High Speed Steel.
6. State the applications of tool steel.
7. Define degree of polymerization.
8. State any two properties of ceramics.
9. Define fatigue.
10. List the testing methods of metals.
PART B - (5 x 16 =
80 marks)
11. (a) (i) Explain the various micro
constituents' presents in steel. (10) (ii) With a neat sketch, label the reactions of iron carbon diagram. (6)
Or
(b) (i) Draw
the Iron carbon
diagram and explain
in brief. (10)
(ii)
State the properties and applications of PLAIN CARBON steel. (6)
12.
|
(a)
|
(i)
|
Explain
the procedure of Jominy end quench
test.
|
(10)
|
(ii)
|
Distinguish between
annealing and tempering.
|
(6)
|
||
Or
|
||||
(b)
|
(i)
|
Explain in
detail the
flame hardening and induction hardening.
|
(10)
|
|
(ii)
|
Compare between austempering and martempering.
|
(6)
|
||
13.
|
(a)
|
(i)
|
With a neat sketch, explain precipitation
hardening.
|
(10)
|
(ii)
|
State the
composition, properties and uses of bearing
alloys.
|
(6)
|
||
Or
|
||||
(b)
|
(i)
|
Explain the
effect of alloying elements in steel.
|
(10)
|
|
(ii)
|
Discuss about the Grey cast iron.
|
(6)
|
||
14. (a)
|
(i)
|
Write short notes
on (1) Ceramics (2)
Formaldehydes.
|
(10)
|
|
(ii)
|
What is PMMA?
Describe it in detail.
|
(6)
|
||
Or
|
||||
(b)
|
(i)
|
Explain in detail
Engineering polymers.
|
(10)
|
|
(ii)
|
State the
properties and uses of reinforced
composites.
|
(6)
|
||
15. (a)
|
(i)
|
Explain the
mechanism of
plastic deformation.
|
(10)
|
|
(ii)
|
Write a short note
on Creep.
|
(6)
|
||
Or
|
||||
(b)
|
(i)
|
Describe the procedure of tensile test
for metals.
|
(10)
|
|
(ii)
|
Write short notes
on Hardness testing.
|
(6)
|
||
2
p 1430
- --- -----------------------
All Mechanical Engineering lecture notes PDF,PPT, question bank, University questions, unit wise 2 marks and answers were uploaded in this website.
Copy and paste the link for more university questions
http://annaunivstudymaterials.blogspot.com/2015/12/me6403-engineering-materials-and.html
Search any study materials on top right side of this site or visit annaunivstudymaterials.blogspot.com
ME6403 ENGINEERING MATERIALS AND METALLURGY
OBJECTIVES:
To impart knowledge on the structure, properties, treatment, testing and applications of metals
and non-metallic materials so as to identify and select suitable materials for various
engineering applications.
UNIT I ALLOYS AND PHASE DIAGRAMS
Constitution of alloys – Solid solutions, substitutional and interstitial – phase diagrams, Isomorphous,
eutectic, eutectoid, peritectic, and peritectoid reactions, Iron – carbon equilibrium diagram.
Classification of steel and cast Iron microstructure, properties and application.
UNIT II HEAT TREATMENT
Definition – Full annealing, stress relief, recrystallisation and spheroidising – normalising, hardening
and Tempering of steel. Isothermal transformation diagrams – cooling curves superimposed on I.T.
44 diagram CCR – Hardenability, Jominy end quench test - Austempering, martempering – case
hardening, carburizing, Nitriding, cyaniding, carbonitriding – Flame and Induction hardening – Vacuum
and Plasma hardening. .
UNIT III FERROUS AND NON-FERROUS METALS
Effect of alloying additions on steel- α and β stabilisers– stainless and tool steels – HSLA, Maraging
steels – Cast Iron - Grey, white, malleable, spheroidal – alloy cast irons, Copper and copper alloys –
Brass, Bronze and Cupronickel – Aluminium and Al-Cu – precipitation strengthening treatment –
Bearing alloys, Mg-alloys, Ni-based super alloys and Titanium alloys.
UNIT IV NON-METALLIC MATERIALS
Polymers – types of polymer, commodity and engineering polymers – Properties and applications of
various thermosetting and thermoplastic polymers (PP, PS, PVC, PMMA, PET,PC, PA, ABS, PI, PAI,
PPO, PPS, PEEK, PTFE, Polymers – Urea and Phenol formaldehydes)- Engineering Ceramics –
Properties and applications of Al2O3, SiC, Si3N4, PSZ and SIALON –Composites-Classifications- Metal
Matrix and FRP - Applications of Composites.
UNIT V MECHANICAL PROPERTIES AND DEFORMATION MECHNISMAS
Mechanisms of plastic deformation, slip and twinning – Types of fracture – Testing of materials under
tension, compression and shear loads – Hardness tests (Brinell, Vickers and Rockwell), hardness
tests, Impact test lzod and charpy, fatigue and creep failure mechanisms.
OUTCOMES:
Upon completion of this course, the students can able to apply the different materials, their
processing, heat treatments in suitable application in mechanical engineering fields.
TEXT BOOKS:
1. Avner,, S.H., “Introduction to Physical Metallurgy”, McGraw Hill Book Company,1994.
2. Williams D Callister, “Material Science and Engineering” Wiley India Pvt Ltd, Revised Indian
Edition 2007
REFERENCES:
1. Raghavan.V, “Materials Science and Engineering”, Prentice Hall of India Pvt. Ltd., 1999.
2. Kenneth G.Budinski and Michael K. Budinski, “Engineering Materials”, Prentice Hall of India
Private Limited, 4th Indian Reprint 2002.
3. Upadhyay. G.S. and Anish Upadhyay, “Materials Science and Engineering”, Viva Books Pvt.
Ltd., New Delhi, 2006.
4. U.C.Jindal : Material Science and Metallurgy, "Engineering Materials and Mettalurgy", First
Edition, Dorling Kindersley, 2012
